Neatsvor X600pro cleaning robot: laser navigation and wet cleaning

Not only power is important for cleaning robots, but their ability to accurately guide navigation and avoid obstacles while cleaning is also important. Thanks to laser navigation technology, Neatsvor X600pro creates an interactive map of an apartment, allowing users to effectively plan for cleanliness.

Neatsvor X600pro uses laser navigation technology, which enables vacuum extraction. From a distance of up to 1.5 m, you can set up a clean course by examining all obstacles that can ‘see’ everything around you, leaving nothing behind and in the shortest possible time. You can complete tasks within. Create an interactive map of your structure and show it to the robot, sweep areas and set up virtual walls that cannot be jumped over.

The maximum suction power of the vacuum cleaner is 6000Pa, depending on the selected pattern. When a carpet is detected, the vacuum cleaner automatically increases its output. Cleans more thoroughly. We also installed two auxiliary brushes on the side to remove any impurities under the wall or in corners. All dust is collected in a large 600ml dust case and can be captured by the triple filtration system. Clean air with the smallest particles can be exported.

The vacuum also supports a moisture traction function. For this purpose, an additional 350 ml water tank can regulate the liquid supply. Yes. There are three cleansing modes to choose from, depending on the level of dirtiness and the type of floor covering.

The bot uses a mobile program that can use the specified area and cleaning timetable and goes through it. Controlled by voice commands from a Google smart assistant. Depending on the selected output, the vacuum will have a battery life of 150 minutes. If the battery is low or When exhausted, it automatically returns to the charging station.